Amplifier LD Systems IPA 412 T
4-channel DSP Installation Amplifier 4 x 120 W @ 4 Ohm / 70V/100V
LDIPA412T
1 480,00 €
Availability
Out of stock
We will contact you ASAP with delivery estimates.
Send us information where you can buy this item cheaper and we will match the price.
-
Quick Handling Buzz buzz, our busy bees work fast
-
Safe Packaging So that there wouldn't be any surprises
-
Free Shipping When purchasing items for 299€ or more
-
Need any help? Our support is here to help
Product Details
Description
Features:
Professional 4-channel installation amplifier
- Stereo/parallel/bridge mode selector switch per channel pair
-
User-friendly front panel with signal, limit, protection, mute and bridge mode LEDs per channel and clipping LEDs for the inputs
-
DSP presets with HPF and LPF which can be activated via DIP switches
-
Equipped for future LD Systems remote control panels and paging microphones
-
Powerful class-D power amplifier with 4 x 120 W (IPA 412 T) or 4 x 240 W (IPA 424 T) at 4 Ohm (transformer bypass) or 70V/100V outputs through toroidal core transformer
-
4 balanced line inputs and 4 speaker outputs with terminal block connections
-
Speaker protection circuits: DSP limiter, overcurrent, direct current, overheating, short circuit as well as switchable auto standby mode
-
REMOTE audio and control bus based on CAN architecture (Controller Area Network)
-
Slot for future optional expansion cards for Ethernet or Ethernet + Dante
Specifications:
- Type: installation power amplifier
- Manufacturer: LD Systems
- Model: IPA 412 T
- Audio channels: 4
- Output circuitry: class D
- Operating voltage: Wide Range SMPS with PFC (power factor control)
- Mains connector: IEC socket
- Auto-standby power: yes, switchable (on-off)
- Time to auto-standby: 20 min with no audio input signal
- DSP: yes
- Remote-Bus: yes
- Indicators: Front Panel: "PROT", "LIMIT", "SIG", "BRIDGE" and Mute Symbol LED´s. Power On/ Standby LED, Rear Panel: 4x Input Clip LED´s, Remote Lock LED (Red)
- Controls front panel: On / off switch, standby
- Controls element back panel: "BRG“ (Bridge), "PAR“ (Parallel), "ST“ (Stereo), Amplifier Channel Mode, Low-Z and High-Z switches (paired), Output Volume potentiometers, Preset A and B switches, Remote Lock, Remote ON/OFF, Remote-Mode, Standby On/Off
- Inputs: 4x Balanced Line Inputs, Remote Bus Audio Input
- Input connectors: 6-pin Terminal Block Pitch 3.81mm, Remote IN/OUT RJ45, Service Micro USB Type-B
- Expansion slot: For optional Ethernet, or Ethernet + Dante cards
- Cooling: front to rear/side airflow, Passive + 2-zone temperature controlled active cooling
- Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
- Fuse: T10AL 250 V
- Inrush current power off-standby: 2.8 A
- Inrush current standby ON: 0.5 A
- Power consumption @ standby: 0.9 W
- Power consumption @ idle mode: 25 W
- Power consumption @ full load: 790 W
- Operating temperature: 0 °C - 40 °C; (max 60% relative humidity)
- Rated ouput power (1kHz @ 4 Ohms): 4 x 120 W (1,5 Seconds Sine Burst)
- Rated ouput power (1kHz @ 8 Ohms): 4 x 60 W (1.5 Seconds Sine Burst)
- Rated ouput power (1kHz @ 16 Ohms): 4 x 30 W (1,5 Seconds Sine Burst)
- Rated ouput power (1kHz @ 8 Ohms, bridged): 2 x 235W (1,5 Seconds Sine Burst)
- 4 x 240W, Transformer Coupled Output: 4 x 120W, Transformer Coupled Output
- Protection circuits: Audio Limiter, DC, HF Protect, HPF (High-Z), short circuit, temperature, thermal overload
- Minimum load impedance per channel: 4 ohms Single-Ended, 8 ohms Bridge
- Dimensions (W x H x D): 483 x 44.5 x 425mm
- Weight: 8.7kg
Reviews
Send us information where you can buy this item cheaper and we will match the price.