dB Technologies IA504 R 4-ch amplifier

The dB Technologies IA504 is a half rack sized class-D power amplifier that can work both for constant voltage systems (70 or 100 Volts) as well as professional audio applications with 4 time 125 W 4 ohms, fit for stereo or bridge configuration. Two versions are available: both are equipped with onboard DSP, full range PSU with Power factor correction and a GPIO interface, but they differ on the networking side. In facts, IA504R version comes with RDNet ports, and IA504D with Dante ports, able to embed remote control and digital audio-in.

Specifications:

• Type CLASS D Half-rack Amplifier
• Acoustical data
• Single channel mode 4 Ohm / 8 Ohm / 16 Ohm (no 70V / 100V)
• Bridged mode 8 Ohm / 16 Ohm
• Preset Flat, dBTechnologies speaker, User preset
• Input Impedance 20 kOhm balanced
• Frequency Response 20 - 20.000 Hz
• Amplifier
• Total rated power 280 W RMS @ 230Vac / 250 W RMS @ 120Vac
• Single channel driven 4 Ohm: 425W Peak / 280W RMS
• 8 Ohm: 245W Peak / 245W RMS
• 16 Ohm: 135W Peak / 135W RMS
• 8 Ohm (Bridge): 619W Peak / 280W RMS
• 70V: 250W RMS
• 100V: 240W RMS
• All channels driven4 Ohm: 225W Peak / 70w RMS
• 8 Ohm: 180W Peak /70 W RMS
• 16 Ohm: 125W Peak / 70W RMS
• 8 Ohm (Bridge): 440W Peak / 140W RMS
• 70V: 140W RMS
• 100V: 140W RMS
• Mains connections IEC 10A connector
• PFC Yes
• Nominal Voltage115Vac - 240Vac @50/60Hz
• Operating Voltage90Vac - 264Vac @50/60Hz
• Processor
• AD 24 Bit @48kHz
• DA 24 Bit @48kHz
• Limiters Compressor on processing channels
• Peak limiter on output channel (also used in dBTechnologies preset)
• Input Channel 4 Analog Balanced (EuroBlock 3.81mm)
• Output Channel 4 (EuroBlock 5.08mm)
• Service Data Frontal USB
• (AuroraNet setup & control)
• Networking 2 x RJ45 RDNet
• (AuroraNet setup & control)