LD Systems IMA 60

Features:

• Line input for emergency signal with contact closure
• 2 microphone/line input sockets with microphone/line switch and switchable 24 V phantom power
• Switchable chime feature in Mic/Line 1 channel
• 2 line inputs with RCA sockets and Bluetooth 4.0 interface (mono summed)
• 65W Class-D Amplifier with Lo-Z / Hi-Z selector switch and 4 Ohm / 100V / 70V outputs
• Balanced AUX line output with Music-Mix switch, for controlling external amplifiers, active subwoofers or music-on-hold systems
• 4 priority levels for comprehensive integration options
• Switchable auto standby mode for reduction of energy consumption
• Intuitive control panel design for operation with capacitive controls for selecting music source and Bluetooth pairing
• Universal wide-range switching power supply

Specifications:

• Type: Amplifier
• Manufacturer: LD Systems
• Model: LDIMA60
• Product type: Installation mixer preamplifier
• Emergency input: 1 balanced line input
• Mic/ line inputs: 2
• Mic-/ Line Input Connectors: 2 unbalanced stereo line inputs, Bluetooth 4.0
• Music sources: 2 unbalanced stereo line inputs, Bluetooth 4.0
• Line outputs: 1
•  Reinforced Main Outputs: 1 with output mode selector (Low-Z/High-Z)
• Cooling: Convection
• Priority levels: 4
• Nominal input sensitivity: -15 dBu (Sine 1 kHz, gain max)
• Nominal input clipping: 20 dBu (Sine 1kHz)
• Priority Contact closure: +5VDC normally open for dry contact
• Connector: 5-pin Terminal Block, pitch 5.08mm
• Nominal input sensitivity Mic: -40 dBu (sine 1 kHz, gain max)
• Nominal input sensitivity Line: -17 dBu (sine 1 kHz, gain max)
• Nominal input clipping Mic: -5 dBu (Sine 1kHz)
• Nominal input clipping Line: +19dBu (Sine 1kHz)
• Phantom power: + 24V, 10mA switchable
• Connector Mic/Line1: 5-pin Terminal Block, pitch 5.08mm, XLR/6.3 mm jack
• Connector Mic/Line 2: 1 dual RCA Mono Summed, 3-pin Terminal Block, pitch 5.08mm, Pitch 5.08mm
• Nominal input sensitivity CD/AUX: - 6.22 dBV (Sine 1 kHz, Gain max)
• Connector CD/AUX: 2 x dual RCA Mono Summed
• Amplifier Outputs: High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load
• Preamplifier input: 5-pin Terminal Block, pitch 5.08mm
• RMS Power ( W ): 65 W (Continuous sine wave 1kHz, 4 ohm load)
• Power ( Peak ) (W): 70 W (100 msec sine 1kHz Burst @ 4 ohm load)
• Frequency range: 20 Hz - 20 kHz (LO-Z, -3 dB), 60 Hz - 20 kHz (HI-Z, -3 dB)
• Tone controlBass: +/-10 dB (100 Hz)
• Tone control Treble: +/-10 dB (10 kHz)
• Protection circuits: Audio Limiter, over-current, short circuit, thermal overload
• Connector AUX-output: 3-pin Terminal Block, pitch 5.08 mm
• Maximum gain: 22 dB
• Type: Switching power supply
• Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
• Power consumption (max.): Line: -17 dBu (sine 1 kHz, gain max)
• Idle power consumption: 7.5 W (no signal input)
• Power Consumption @ Standby: <1 W
• Operating temperature ( non-condensing ): 0°C - 40°C; < 85% humidity
• Time to Auto-standby: 20 Min.
• Dimensions ( height with rubber feet ): 210 x 95 x 266.76 mm
• Optional accessories: Rack mounting hardware
• Weight: 2,39 kg