Wireless System Set Shure P3TRA215CL

The PSM®300 Stereo Personal Monitor System delivers detailed 24-bit digital audio and reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable wireless coverage extends over 300 ft (90 m) of range and eliminates dropouts. Easy to setup and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume using MixMode® technology or stereo mode to create a personal mix from two channels of audio.

Features:

• Send two channels of audio wirelessly to performers onstage 
• 24-bit digital audio provides clear, detailed sound 
• Patented Audio Reference Companding sounds more like wired 
• Up to 90 dB signal-to-noise ratio
• Exceptionally wide stereo separation 
• Solid analog RF connection over a 300 ft (90 m) range 
• Create a personal mix from the bodypack with MixMode® technology or stereo mode 
• Frequency scan and IR sync quickly finds and assigns a clean channel 
• Half-rack, single channel transmitter with included rack mount kit 
• P3R bodypack systems available with SE112 Sound Isolating™ Earphones 
• P3RA professional bodypack systems available with SE215 Sound Isolating™ Earphones

Specifications:

• Type: Personal Monitor System 
• Manufacturer: Shure
• Model: P3TERA215CL

PSM®300 System 

• RF Carrier Range: 488–937.5 MHz
• Compatible Frequencies Per band: Up to 15
• Tuning Bandwidth: 24 MHz maximum
• Operating Range: 90 m
• Audio Frequency Response: 38 Hz–15 kHz
• Signal-to-Noise Ratio: 90 dB (typical)
• Total Harmonic Distortion: <0.5% (typical)
• Companding: Patented Shure Audio Reference Companding
• Spurious Rejection: >80 dB (typical)
• Frequency Stability: ±2.5 ppm
• MPX Pilot Tone: 19 kHz (±1 Hz)
• Modulation: FM*, MPX Stereo
• Operating Temperature -18 °C to +63 °C 

P3T Wireless Transmitter

• RF Output Power: 10, 20, 30 mW
• RF Output Impedance: 50 Ω (typical)
• Weight: 783 g
• Dimensions: 43 × 198 × 172 mm 
• Power Requirements: 12–15 V DC, 260 mA maximum

Audio Input

• Connector Type: 6.35 mm TRS
• Polarity: Tip positive with respect to ring
• Configuration: Electronically balanced
• Impedance: 40 kΩ (actual)
• Nominal Input Level: Switchable, +4 dBu, -10 dBV
• Maximum Input Level: +4 dBu: +22 dBu -10 dBV: +12.2 dBu
• Phantom Power Protection: Up to 60 V DC

Audio Output

• Connector Types: 6.35 mm TRS
• Configuration: Electronically balanced
• Impedance: Connected directly to inputs

P3R Wireless Bodypack Receiver

• Active RF Sensitivity: 2.2 μV
• Image Rejection: >90 dB
• Adjacent Channel Rejection: >60 dB
• Intermodulation Attenuation: >50 dB
• Blocking: >60 dB
• Audio Output Power: 80 mW (per output)
• Minimum Load Impedance: 16 Ω
• Headphone output: 3.5 mm stereo
• Weight: 98 g
• Dimensions: 110 × 64 × 21 mm 
• Battery Life: 5–7 hours, AA batteries

P3RA Professional Wireless Bodypack Receiver

• Active RF Sensitivity: 2.2 μV
• Image Rejection: >90 dB
• Adjacent Channel Rejection: >60 dB
• Intermodulation Attenuation: >50 dB
• Blocking: >60 dB
• Audio Output Power: 80 mW (per output)
• Minimum Load Impedance: 16 Ω
• Headphone output: 3.5 mm stereo
• Weight: 196 g 
• Dimensions: 99 × 66 × 23 mm
• Battery Life: 4–5.5 hours, AA batteries 5.5–7 hours, SB900A battery